For decades, homeowners have controlled how much cold air enters their home through a thermostat that had to be controlled manually by using a simple slider or needle. When you set your thermostat to a certain temperature, the air conditioner would work to cool the room at that temperature indefinitely. Thermostats have greatly changed since then, and with new, modern features, homeowners are still trying to get used to them and how they work. Homeowners aren’t having problems with setting the thermostat, but how to control it throughout the day. Newer thermostats are made to help homeowners save on energy bills, but if not used right, wasted energy could still happen from time to time.
If you get a new thermostat from a local A/C repair Houston, here is everything that you need to know about it:
Programming A Thermostat
Programmability is one of the biggest things that homeowners overlook when using a new thermostat. New thermostats rely on having to control themselves in order to regulate temperatures throughout the day and turn off at night. This is designed to save homeowners money on heating and cooling bills. Today’s heaters and air conditioners, however, cause an increase in demand which can raise heating costs if it overworks itself. That is why having your thermostat programmed is crucial so that your heating and cooling units work smart as a result.
Tips for Using Your Thermostat
Here are some suggestions for managing your new thermostat:
Turn Your Heating or Cooling Off If You Leave Home
If there are times when the home is locked up and unoccupied, there is no reason to have the heater running, because you will continue wasting energy and not feel those benefits. You might enjoy the feeling of returning home to a warm or cool entrance, so you can adjust your thermostat to 50 or 60 degrees to still get a satisfying feeling walking through the door.
Don’t Have Your Heating Force Your Cold Appliances to Work Harder
Little do homeowners know that when you heat the home, your refrigerator and freezer require more power to perform to the standards that they were designed for. This also contributes to your heating and cooling bills. With that said, try to set your thermostat slightly lower so that your freezer and refrigerator use less power as a result.
Replace the Batteries Every Year
Thermostats run on batteries, and most homeowners don’t realize or forget this. Instead of waking up one morning to see that your thermostat’s batteries have died, remember to replace those batteries annually so that it never comes to your thermostat running out of power.
Have Your Heating and Cooling Inspected Annually
One thing you should also do annually is have a specialist check your heating and air conditioning units for any problems. If you do not realize there is something wrong with any of your units, you could end up spending more on energy bills and not understand why.
Heating and air conditioning units age over time, and when they get older without proper maintenance, they will have to work harder and use more energy in order to keep working optimally. Make sure that it does not come to that with a proper yearly inspection.